Rubber Process Oil (RPO) in Dubai, UAE
Ever Brilliant
Best Rubber Process Oil (RPO) Supplier in Dubai
“Ever Brilliant General Trading LLC.” Serves its client by providing Rubber Process Oil in Dubai (RPO in Dubai) also known as “Plasticizer” or “Extender Oil” as a processing oil used in the Rubber industry to improve its processing characteristics, such as flow, consistency, and extrudability.
RPO is the raffinate produced during the distillation of either Aromatic or Naphthenic or Paraffinic based crude oil in the solvent extraction stage of its lube oil fraction.
- “Naphthenic RPO” type exhibits low volatility and good low-temperature flexibility and is extensively used in the manufacturing of butyl tubes, EPDM based rubber products such as profiles, hose pipe & automotive components, etc.
- “Paraffinic RPO” type exhibits good oxidation stability, excellent low-temperature properties and low volatility and is extensively used in the manufacturing of foot wear, LPG tubes, hot water bags, molded & extruded products, etc.
- “Aromatic RPO” type exhibits good solvency, high viscosity and low volatility and is extensively used in the manufacturing of Automobile Tires, Tread Rubber, Conveyor Belts, Automotive Components & Floor Mats etc.
3-1- “Mild Extracted Solvate (MES)” is used as an extender, softener, and general processing aid in natural rubber, synthetic rubber, and other polymers. This produt is used in the following cases: Tire Retreading, Belt Manufacturing and Belting, Tire Manufacturing Molding, Extruding tubing and hoses, Fertilizers, etc.
3-2-” Residual Aromatic Extract (RAE)” is used as an oil extender in rubber which is one of the types of rubber process oil and is used as a carrier oil, softener, filling agent, and diluent used in the following cases: Following international standards , Increasing the life of rubber ,Solubility properties ,Improving the processing ability of rubber in grinding and mixing ,Production of the low amount of waste in this process ,Good wear resistance ,Good flexibility at low temperature ,Good rebound resistance , Save fuel and energy
3-3- “Treated Residual Aromatic Extract (TRAE)” is a left over from the solvent extraction process of vacuum distillation which has many applications in the tier, rubber, and tape industries. This product is a diluting, filling, and softening oil that will facilitate products’ processing and proper functioning in various sectors, especially rubber and is used in the following industries: Tires and tubes, Battery containers, Carrier oils, Plastic, Extruded products
3-4- “Treated Distillate Aromatic Extracted (TDAE)” is used as an elastic softening agent during the rubber vulcanization process to help reduce the heat generation process. It is used in the following products: Lubricants, Tire, industrial ink, Shoes, Cables, flooring, etc.
3-5- “Distillate Aromatic Extract (DAE)” is a byproduct of the vacuum distillation solvent extraction process as a raw material in manufacturing lubricating base oils and is used in the following industries or products: Heavy fuels, Production of rubber and plastic carrier oils , Diluents and fillers ,processing rubber in grinding and mixing, etc.
Generally speaking, characteristics like Rolling resistance, Torque development, Abrasion resistance, Elongation break and Tensile strength is lowest in Paraffinic RPO and second lowest in MES RPO, third lowest in Naphthenic RPO, second highest in TDAE/RAE RPOs and highest in DAE RPO type.
The supplied products adhere to the “American Society for Testing and Materials (ASTM)” in the miscellaneous material subcategory “D “.
We can provide the required RPO commodity based on particularities like: Volatility and evaporation, solvating power, low-temperature flexibility, kinematic viscosity (ASTM D7042/445/2161/455), density (ASTM D4052), flash (ASTM D92/93) / pour (ASTM D5950/97) / aniline (ASTM D611) points, color say bolt (ASTM D1500/156), appearance (ASTM D4176), API gravity (ASTM D1298/4052), UV absorbance (ASTM D2269), viscosity gravity constant (ASTM D02501) and total acid number (ASTM D974).
RPO 40,60
| Characteristics | TRAE | Test Method | ||
|---|---|---|---|---|
| Kinematic Viscosity @ 100 ◦C, cSt | min 40 | Max 60 | ASTM D-445 | |
| Flash Point, ◦C | 250 | ASTM D-92 | ||
| Pour Point, ◦C | 42 | ASTM D-97 | ||
| Specific Gravity @ 15, Kg/m^3 | 0.95 | ASTM D-1298 | ||
| Aniline Point, ◦C | 70 | IP-2 | ||
| Sulphur Content, Wt% | 3 | ASTM D-2622 | ||
| Viscosity Gravity Constant (VGC) | 0.874 | ASTM D-2501 | ||
| PCA Content (DMSO), Wt% | - | - | ||
| Refractive Index at 20 ◦C | - | - | ||
| Benzo [a] Pyrene, ppm | ≤1 | Grimmer Method | ||
| Sum of PAH, ppm | ≤10 | Grimmer Method | ||
| Ash Content, Wt% | - | - | ||
| Carbon Type Analysis, % CA CN CP | 20 25 55 | ASTM D-3238 | ||
RPO 60
| Characteristics | RAE | Test Method |
|---|---|---|
| Kinematic Viscosity @ 100 ◦C, cSt | 60 | ASTM D-445 |
| Flash Point, ◦C | 300 | ASTM D-92 |
| Pour Point, ◦C | 20 | ASTM D-97 |
| Specific Gravity @ 15, Kg/m^3 | 995 | ASTM D-1298 |
| Aniline Point, ◦C | 65 | IP-2 |
| Sulphur Content, Wt% | 5 | ASTM D-2622 |
| Ash Content, Wt% | 0.15 | D-482 |
| Carbon Type Analysis, % | - | ASTM D-3238 |
| CA CN CP | 35 5 60 | - |
RPO 10,11,20,40
| Characteristics | RPO | Test Method | |||
|---|---|---|---|---|---|
| 10 | 11 | 20 | 40 | ||
| Kinematic Viscosity @ 100 ◦C, cSt | 10 | 10 | 20 | Min 40 Max 60 | D-445 |
| Flash Point, ◦C | 215 | 215 | 240 | Min 265 Max 300 | D-92 |
| Pour Point, ◦C | 9 | 9 | 15 | Min 15 Max 20 | D-97 |
| Specific Gravity @ 15, Kg/m^3 | 1000 | 1000 | 1005 | Min 995 Max 1020 | D-1298 |
| Aniline Point, ◦C | 35 | 30 | 45 | Min 50 Max 65 | IP-2 |
| Sulphur Content, Wt% | 3 | 5 | 4 | 5 | D-2622 |
| Ash Content, Wt% Carbon Type Analysis, % | 0.01 | 0.1 | 0.15 | 0.15 | D-482 |
| CA CN CP | 55 1 44 | 60 1 39 | 40 15 45 | 50 5 45 | D-3238 |
RPO 145
| Property | Unit | Test Method | Result |
|---|---|---|---|
| Grade | - | - | 145 |
| Type | - | - | Aromatic |
| Kinematic Viscosity @100 °C | mm2/s(cSt) | ASTM D-7042 | 40-50 |
| Density at 15.6°C | kg/m3 | ASTM D-4052 | 1020 |
| Flash Point (Min) | °C | ASTM D-92 | 240 |
| Pour Point (Typical) | °C | ASTM D-5950 | +27 |
| Aniline Point (Typical) | °C | ASTM D-611 | Max 40 |
| VGC | - | ASTM D-2501 | 0.97 |